June 25, 2020 – I worked on the lower rudder fairing some more.
The leading edge of this thing has been giving me fits.
Even when I built up the leading edge, by the time I sanded it smooth, the material in front of the rudder horns was paper thin.
So I bent the tabs of the rudder in just a bit to make some room, then I mixed some more resin with flox and caked it inside the fairing at that point. With the fairing in place, it just fills the gap. When it was set up, I removed it all and sanded to smooth it. It fits much better now.
Time to move on. I hate fiberglass.
Time: 4:20
