July 9, 2019 – I worked on assembling some of the fuel lines in the cockpit.
I needed to make the straight fuel line that goes from the fuel pump/filter assembly to the firewall. pretty simple; it’s just a bend and a straight run. I’m pretty pleased I got the measurement right the first time. I did have to slide the pump and filter in their clamps a little bit, but that worked.
The plans call for securing the line underneath the bracket with a piece of foam, but there’s no more information than that.
Here’s a shot of the tube under the bracket:
I think I might put an adel clamp on the forward end of the bracket and around the tube underneath. It’s pretty solid but I don’t want it to just hang there and vibrate.
I also installed the line from the selector valve to the filter. Kind of tight, but it does fit.
Time: 1:10
