November 18, 2015 – I assembled the elevator bellcrank a long time ago. I decided to install it. The bellcrank goes in with some washers and a couple of spacers. I had to add two washers to get side-to-side motion out of it.
I also decided to fit the control stick bellcrank. I wrestled it in place before I realized I had to ream the bolt holes, so out it came again. It is shimmed in place with washers to fit, so that took a little bit of doing. I’ll have to record how many washers went where, but it’s in for the moment. I’m sure it will have to come back out at some point.
Time: 1:35
