September 14, 2015 – I moved on to the center covers in the cockpit.
I had previously made the brackets for the forward tunnel cover that goes between the seats. I screwed them into place and fitted the cover plate. The plate gets a bend on the forward end that goes up the seat pan covers. I didn’t drill the brackets for the cover plate holes, but I marked their locations. I want to make sure everything fits correctly before I drill them. I did drill the screw hole on the forward end.
I also fitted the parts together for the forward covers which include the heat diffuser and the box for the fuel selector valve. I need to pick up a threaded drill bit for the attach holes in the floor stiffeners before I try to drill this any further.
I moved on to other things.
Time: 2:25
